If you are facing problems related to your Linksys smart router, then this article will solve all your issues. The Linksys Smart WiFi router is an advanced router that offers you more technology features compared to a normal WiFi router. This article will help you to troubleshoot all problems, such as connectivity problems, hardware issues, being unable to access the Linksyssmartwifi login page, etc. Let’s start:
Types of Troubleshooting Issues and Their Solutions
- Hardware
Issues With Router
- Connectivity
Issues of Linksys
- Unable to
Access the Login Page
- Resolve IP
Address Conflict
- Update
firmware of router
- Remove unauthorized devices
Hardware Issues With Router
If your router LED lights flash abnormally, it means
your router faced hardware issues. To solve this issue, perform the power
cycling process on all the network devices.
1. Make sure your router receives a proper power
supply.
2. Check all the Ethernet cables and LAN ports are
in good condition. If any port is damaged or the cable not properly connected
to the port properly, fix it.
3. Reset the network devices to restore factory
default settings.
Connectivity Issues of Linksys
Connectivity issues arise when your devices are
unable to connect to the network of Linksys WiFi. To resolve these issues,
follow the steps given below:
1. Make sure that your device is in the WiFi range
of your network. Ensure that the SSID or password is correct or not.
2. Reboot your router by plugging it out of the
power socket, and after a few seconds, plug it again.
3. Check your router to be properly connected to the
modem.
Unable Access Login Page
It is not so difficult to access the Linksys Router Login page. There are just a few things you need to keep
in mind while logging into the router; these things are:
- Make sure
that your device is connected to the network of the Linksys router.
- Use the
updated version of the web browser. And type the correct URL, myrouter.local,
into the address bar.
- Ensure
that the login details you enter are correct.
- Temporary
disable the firewall and VPN software during login.
Resolve IP Address Conflict
IP conflict problems occur when more than one
Linksys device has the same IP address. To resolve these issues, follow these
steps:
1. Clear the cache of all network devices.
2. Check the router DNS setting in the admin panel
and ensure that it is properly configured.
3. Use alternative DNS servers like Google DNS and
etc. to improve performance.
Remove unauthorized devices
When unauthorized devices connect with your network,
then it decreases the WiFi speed. To remove unauthorized devices:
1. Open the admin panel and check the list of
devices that connected to the network.
2. Disconnect or block the unauthorized devices from
the network.
3. To increase your network security, change the
password from time to time.
Update firmware of router
It is very important to update the firmware of the
router. Because it helps to fix bugs and add new functions to the router. To
update firmware, steps are:
1. Connect your device to the Linksys network.
2. To login into the admin panel, open the web
browser and visit myrouter.local.
3. After logging in, find the firmware update at the
upper corner of the screen.
4. Click on the upgrading firmware to update the
firmware.
There is another option on the dashboard:
re-flashing firmware. if your router have already updated Firmware. Click on
this option to refresh the update.
Conclusion
By following these steps, you can troubleshoot all problems related to your Linksys Smart WiFi router. And ensure a fast and reliable network throughout your home. All the steps are practical; please follow the steps carefully and also follow precautions.
.jpg)
