Victony WiFi Extender Not Showing Up? Here’s How to Fix It!

 

What’s the point of performing Victony WiFi extender setup when the extender doesn’t show up? - This question might have arisen in the mind of millions of users who have done Victony setup in their houses to get access to a high-speed internet connection. Is your Victony extender also not showing up? If yes, then have a brisk walk through this post. By the end of the post, you might have successfully troubleshot the issue.

[Resolved] Victony WiFi Extender Not Showing Up

Tip 1 – Reboot the Extender

Right off the bat, start troubleshooting the problem you’re facing with the easiest and one of the most effective techniques – if it doesn’t work, try turning it off and on again. Yes, you get it correct. We are talking about rebooting. Know that rebooting the extender will help it get rid of technical glitches that might be waning the extender’s efficiency.

Therefore, without putting much stress on your mind, consider taking your extender out of the wall socket, and placing it somewhere for a while. Once you realize that enough time has been provided to your extender, consider plugging it back into the wall outlet. Now, see if your extender starts showing up.

Tip 2 – Change the Extender’s Location

If the rebooting process has not been of much luck to you, then chances are that the extender is not showing up due to its wrong placement. By the wrong placement, we mean that your extender is sitting in an area filled with WiFi interference. FYI, WiFi interference blocks the path of the WiFi signals emitted by the extender. Thus, you need to change the location of your extender.

However, be wise and place your extender away from thick concrete walls and corners. Besides, avoid selecting a location that is packed with a number of reflexive surfaces, heavy electrical appliances, objects carrying a large amount of water, tracking devices, and metal objects. If possible, try to select a well-ventilated room for your Victony WiFi repeater.

Tip 3 – Use the Ethernet Connection

Have you connected your Victony range extender and the host router using a wireless medium? Well, a wireless source is not always a reliable option when it comes to networking. Therefore, we advise replacing the wireless source with a wired one. However, you should keep in mind that the Ethernet cable you’ve put to use is not damaged from any point and is strongly connected to the ports of your WiFi devices.

In case you’re still not in the mood to use an Ethernet connection, consider reducing the distance between your Victony extender and router. It will help them communicate without interruption. But, do not stick your devices with each other. Otherwise, you’ll soon find yourself caught in another web of Victony WiFi extender issues.

Tip 4 – Update the Device’s Software

Perhaps, the device on which your Victony WiFi extender is not showing up is running on an outdated software version. It’s not a hidden fact that the OS of the device controls its overall performance.

Therefore, grab our advice and consider updating the software of your device. Keep in mind that the steps for updating the software might vary according to the device you own.

Tip 5 - Reset the Extender

Are you still running out of luck? Well, there’s a high possibility that your extender is not configured properly due to which it is not showing up.

To rid yourself of the issue, consider restoring your Victony extender to the factory default mode. To know how to reset Victony WiFi extender, check out the user manual that has come with packaged contents.

And, with this last hack, we’re winding up the post enclosing the troubleshooting techniques that need to be implemented when the extender doesn’t show up. Hopefully, you will be able to do away with the issue with the help of this article.